The economical safety system for wall and column formworks
The pre-assembled, fold-out working platforms, with their integrable front/rear and side railings, ladders and self-closing manhole lids, are ready for immediate use and greatly enhance workplace safety. The system can be used on Framax Xlife framed and column formwork units, Framax Xlife plus and Wall formwork FF20, Top 50 and Top 100 tec.
High workplace safety
achieved by integral safety functions
safe assembly, as the lift-in-one units can be assembled in the horizontal
hazard-free access to the work deck made possible by integrable telescoping ladders and integrated, self-closing manhole lids
the all-round front/rear and side railings provide safe working conditions on the formwork
no need for improvisations, as the system adapts to the formwork with safe solutions for platform extensions and corner transitions
aided by practice-focused system attributes
quick to put up and take down, thanks to its pre-assembled fold-down platform units
quick and easy to reposition, as the formwork and platform can be raised simultaneously in just one crane cycle
unobstructed walkaround access, because the panel struts are fixed to the rear of the platform
workflows are optimised by the integrated connectors
Saves time, cuts costs
by being highly versatile
highly economical, because a single platform concept can be used on all Doka wall systems
can also be retro-fitted to upright formwork with a lifting adapter
lower commissioning quantities cut storage and freight costs
This platform system can be used on framed formwork and timber-beam formwork; in each case, three different lengths of platform are available. A steel frame protects the platform decking from damage during work on the site. The integrated connection options make it easier to connect add-on components for e.g. corner transitions and closures at a later stage.
Extending the platforms to either side
The platform can be telescoped out by up to 0.60 m on either side using the Xsafe plus platform extension 0.60m. In combination with the Xsafe plus platform transition and the Xsafe plus handrail extension, this creates safe platform transitions on the narrowsides of the formwork at corners or on closure gaps.
Xsafe plus supporting strut
The Xsafe plus supporting strut allows the platform inclination to be adjusted by +/- 5 degrees. The work deck always remains horizontal, providing safety on inclined formwork units as well. The strut also serves to transfer the forces when panel struts are connected up.
Optimal safety on the opposing formwork
The Framax adapter XP allows for mounting the Protective grating XP while it is flat on the ground. Built-in safety right from the start. If necessary, the handrail post can be tilted by 15 degree, therefore providing more space for the pouring operation.
The integrable side railing provides safe working conditions and is designed for use on either the left- or right-hand side of the platform. To safeguard closure gaps between two platforms, the system can be telescoped in 5 cm increments up to max. 50 cm, and moved backwards to allow unobstructed access around the platform.
Railings facing formwork
Thanks to the 'mounted-ahead' Xsafe plus counter railing, fall-hazard protection is already in place before anyone steps onto the platform. The side protection is thus complete on all four sides.
Ladders and manholes integrated in the system
The integrable ladder system and the self-closing manhole in the platform provide hazard-free access to the work deck. The telescoping ladder (155 cm to 271 cm) covers a large number of upright and horizontal panel combinations.
Xsafe plus handrail extension
The handrail extensions provide complete safety in cases where the platform has been enlarged with the 'platform extension'.
Connecting to framed formwork
The Xsafe plus platform waling 1.50m is attached to the top part of the framed formwork, where it connects the pouring platform to the formwork. The Xsafe plus platform waling 2.10m is used in cases where panels are vertically stacked, and aligns the formwork. It also ensures that the intermediate platforms are always in the right position for operating the formwork's connecting and anchoring components.
Connecting to timber-beam formwork
The Xsafe plus waling connector allows the platform waling or multipurpose waling to be connected to the timber-beam formwork.
Connecting to column formwork
Safety is particularly important when columns have to be formed at slab-edges. The Xsafe plus column adapter allows the platforms to be used on column formwork as well. Safe ladderways and fully walkable platforms are solved within the system.
Use as a pouring platform
The Xsafe plus lifting adapter makes it possible to mount an Xsafe plus platform on a framed formwork unit that is already standing in the upright. No walings are needed in order to do this. With this method, the commissioning quantities for the pouring-platform level can be reduced.
Repositioning large units
The Xsafe plus lifting waler makes it possible to lift the formwork into the upright after it has been assembled in the horizontal, and to reposition large formwork units together with the platform system. The lifting waler is CE-marked and is supplied with Operating Instructions.
Transport and handling
Where space is tight, the Xsafe plus swivel plate enables large formwork units to be delivered to the site complete with the platform system. This means that less assembly work is needed on the site.
Thank you for your interest - Platform system Xsafe plus.
Please, fill in the form below to receive more information on this topic and access it conveniently from your email later.
All listed fields are required.
Consent to cookies & data transfer to the United States of America
We request your consent
2) to the transfer to the United States of America of data obtained through the cookies
to continuously improve the functionality of our website,
to facilitate the experience of using the Doka Online Shop, or
to place advertising suitable for you as user on certain platforms.
See our Data Privacy Statement for more information about our cookies.
We also offer you the possibility of selecting your cookies (advanced cookie settings).
2) Data transfer to the United States of America
Some of our partners are entities established in the United States of America. We transfer your personal data manually or via an interface to these partners in the United States of America.
We would like to inform you that the ruling of 16 July 2020 (Court of Justice of the European Union judgement in case C-311/18, “Schrems II”) invalidates the EU - U.S. Privacy Shield decision that permitted a transfer of personal data to the United States of America. In consequence, as a third country the United States of America does not offer an adequate level of data protection.
For you as user, the risk that the transfer of personal data to an entity established in the United States of America is in particular that your data are subject to access by the United States authorities for monitoring and surveillance purposes and that to a large extent you are without effective administrative and judicial right of redress against such action by the United States authorities.
Personal data that we transfer to the United States of America are in particular IP addresses (Internet Protocol addresses).
We co-operate via various applications with the following recipients:
Monotype Imaging Holdings Inc.
Rocket Science Group LLC
The Trade Desk, Inc.
We require your explicit consent to continue sending your personal data to these providers.
You can revoke your consent with effect for the future at any time, by accessing the cookie settings on the website.