The ergonomic panel floor formwork for residential building construction
Dokadek 20, the beam-less hand-set formwork with coated frame and integrated plate supports ergonomic forming. The system is designed for floors up to 25 cm thick and floor heights up to 3.30 m.
Safe working conditions
as a result of optimised system properties
because panels can be safely set up from ground level
integrated form-facing makes the panels easy to dismantle
infill zones with openings up to 13 cm are safely and quickly closed with the double alu beam tec-2
built-in anti-liftout guard for working safely
high-level workplace safety thanks to compatibility with the Edge protection system XP
Ergonomic work environment
due to minimal system weight
reduced system weight per square metre ensures high efficiency for forming and stripping
minor work-strain as the maximum weight to be lifted by any worker is 17 kg
back-friendly working with panels that are easily tilted up from ground-level
very limited amount of work performed above shoulder-level during forming and stripping
Rapid construction progress
thanks to reduced set-up and take-down times
high forming rate thanks to 2 m² large panels
fast formwork set-up as hardly any crane-time is needed
efficient solutions for infill zones deliver time-savings
The galvanised, yellow coated steel frame of the panel with formwork sheet is long-lived and permits many reuse cycles. The panels are available in sizes 1.00 x 2.00 m and 0.66 x 2.00 m.
Dokadek support head
The standard head for holding the panels firmly. The integral anti-liftout guard prevents any of the panels accidentally falling off, and makes extra precautions (such as wind bracing) unneccessary.
Floor prop Eurex top
Floor prop with impact protector
durable, due to impact protector
easy-to-turn adjusting nut, thanks to special thread geometry
less physical effort needed because the prop is lightweight
operational safety achieved by consistently high load capacity of at least 20 and/or 30 kN in accordance with EN 1065 – Class D/E
Easy, back-friendly working from ground-level
The working posture is usually upright – with Dokadek 20 frequent bending down and inserting panels from above are a thing of the past. Even the panels are stripped without laddering, strenuous overhead work is reduced to a minimum.
Pre-defined assembly sequence
The clearly defined assembly sequence prevents the crew from attempting dangerous improvisations and ensures a consistently high safety level – even when semi-skilled labour is deployed. With Dokadek 20 there is no need to dimension the system in advance thanks to the number of props and the way they are arranged.
Closing infill zones is easy with the double alu-beam tec-2
Infill zones with openings up to 13 cm are safely and quickly closed with the double alu-beam tec-2.
Railings from the Doka edge protection system XP
Dokadek 20 is fully compatible with the Doka edge protection system XP. This brings an added dimension of safety.
Thank you for your interest - Panel floor formwork Dokadek 20.
Please, fill in the form below to receive more information on this topic and access it conveniently from your email later.
All listed fields are required.
Consent to cookies & data transfer to the United States of America
We request your consent
2) to the transfer to the United States of America of data obtained through the cookies
to continuously improve the functionality of our website,
to facilitate the experience of using the Doka Online Shop, or
to place advertising suitable for you as user on certain platforms.
Technically necessary cookies (essential) are required for the proper functioning of the website. If you do not agree with the processing of your data by setting technically necessary cookies, you will not be able to access the website. See also: "Advanced cookie settings".
See our Data Privacy Statement for more information about our cookies. We also offer you the possibility of selecting your cookies (advanced cookie settings).
2) Data transfer to the United States of America
Some of our partners are entities established in the United States of America. We transfer your personal data manually or via an interface to these partners in the United States of America.
We would like to inform you that the ruling of 16 July 2020 (Court of Justice of the European Union judgement in case C-311/18, “Schrems II”) invalidates the EU - U.S. Privacy Shield decision that permitted a transfer of personal data to the United States of America. In consequence, as a third country the United States of America does not offer an adequate level of data protection.
For you as user, the risk that the transfer of personal data to an entity established in the United States of America is in particular that your data are subject to access by the United States authorities for monitoring and surveillance purposes and that to a large extent you are without effective administrative and judicial right of redress against such action by the United States authorities.
Personal data that we transfer to the United States of America are in particular IP addresses (Internet Protocol addresses).
We co-operate via various applications with the following recipients:
Monotype Imaging Holdings Inc.
Rocket Science Group LLC
The Trade Desk, Inc.
We require your explicit consent to continue sending your personal data to these providers.
You can revoke your consent with effect for the future at any time, by accessing the cookie settings on the website.