Take a load off
with DokaXlightUltralight handset forming
The artist’s impression; photos: Adobe Stock
![Störer DokaXlight]()
NEW – also usable as slab formwork!
Done any handset forming today?
On new builds and sites surrounded by other structures – at 22.6 kg per main panel (0.75 x 1.50 m), the robust DokaXlight formwork is cost-saving and easy to use for CIP concrete structures of any type or size. One person can safely handle this formwork with no crane lifts required, so can work proceed faster and resources are used more productively. The maximum concrete pressures are 50 kN/m2 for wall formwork and 75 kN/m² for column formwork, making this hand-set system great for high pouring rates.
![Doka Xlight Slab Sticker]()
NEW - DokaXlight now also used for slab formwork.
With just two accessories, the new DokaXlight support head and the DokaXlight assembly pole, the ultra-lightweight hand-set formwork becomes a handy slab formwork system. In addition, the DokaXlight connector is a new, lightweight connecting element that can be used in walls and slabs without tools.
![DokaXlight Slab Application]()
DokaXlight swivelling up
![DokaXlight Support Head]()
DokaXlight support head
![DokaXlight Connector]()
DokaXlight connector
Your benefits with DokaXlight LeftRight
Cost-saving and time-saving
- lightweight panels and accessories ensure fast progress during the build.
- craneless operations or reduced crane time.
- stepless arrangement of the panels at formwork offsets
- the DokaXlight I-Connector (optionally available) reduces time wasted on searching and carrying and fetching
Versatile
- applicable as wall and slab formwork
- easy adaptation to the structure and universal possibilities on small and large-scale projects
- practical widths grid and three panel heights
- all panels combinable upright and on their side
- DokaXlight universal panels for forming right-angle outside corners, stop-ends and column formwork
Durable
- robust aluminium frame providing all-round protection for the formwork sheetthe durable Xlife sheet gives a high cycle re-useeasy cleaning of the frame because of high-quality powder coatingXlife sheet is easy to replace and the aluminium frame is easy to recondition
Light and ergonomic
- effortless forming because of low weights
- easy and safe handling with the integral, ergonomically shaped grips and profiles
- low-noise operations with the DokaXlight I-Connector and DokaXlight Clip* (both optionally available)
*available soon
The system
DokaXlight’s practical panel size-grid permits easy adaptation to ground-plan and height.
- as column formwork with a permissible fresh-concrete pressure of 75 kN/m²
- as stop-end formwork
- as corner elements
Adapters enable easy combination with other Doka framed formwork systems
Use universal clamps at the function profile or in the frame cross-holes to secure walings with 5-10 cm overall height for a huge range of applications: Stop-end formwork, foundation clamps, infill walings and accessories
![1]()
Dimensionally stable, powder-coated aluminum profiles
- For long service life
![DokaXlight Panel]()
![Icon 2]()
Multi-functional cross-holes
- flexible connection of stop-ends and accessories
- universal panels make the job of forming corners easy
- engagement of top scaffold brackets
![DokaXlight Panel Cross-holes]()
![Icon 3]()
Integrated handles
- make working with the formwork all the easier
![DokaXlight Integrated Handles]()
![Icon 4]()
All-round edge protector
- provides all-round protection for the formwork sheet
- ensures a high-quality concrete finish
![DokaXlight Panel Edge]()
![Icon 5]()
Form-tie sleeves
- tie rods are very easy to insert through the large, conical form-tie sleeves
- protects the formwork while the form ties are being set
![DokaXlight Element 5]()
![Icon 6]()
Integral function profiles
- quick attachment of accessories across the entire width of the panel
![DokaXlight Panel Attached Accessories]()
![Icon 7]()
DokaXlight I-Connector
- permanently installed on the panel, so no risk of loss
- easy interconnection of panels
- no time lost searching for connectors on site
- optionally also as interconnection for wall and slab formwork
![DokaXlight Panel I-Connector]()
![Icon 8]()
Robust Xlife sheet
- concrete surfaces are consistently good even after many use cycles, so less finishing work
- lifespan is longer than average, so fewer costly sheet changes
- fewer repairs, because no splintering around nail-holes
- easy, fast intermediate and final cleaning, also using high-pressure washers
![Doka Xlight Xlife sheet]()
The easy-going all-rounder.
Universally usable, ultra-light formwork.
Alexander Knop, Managing Director, KnopBau GmbH
“DokaXlight is an investment in the future. The job might be a basement, a garage or a complete family home, DokaXlight always gives me the flexibility I need. Even when I have to cast a single-sided wall, I just take DokaXlight and combine it with the lightweight Doka Alu supporting construction frame.”
Stefan Rott, Managing Director, Bauunternehmung & Zimmerei Rott und Wimmer GmbH
“Our people really enjoy working with DokaXlight because it is so light and easy to handle. On big sites we use it in places beyond the reach of the crane. We also use it for renovation work and on small jobs, because that’s where ease of transportation is important. By loading it on to Frami pallets we can even shift the gear from A to B quickly on small trucks.”
Peter Karg, Managing Director Bauunternehmung Peter Karg GmbH
“I reckon that the lightweight DokaXlight is the ideal addition to our super-fast Framax Xlife plus. We use it all the time, for example when we need to erect formwork above a shaft, or make a stop-end for a floor slab.”
Horst Ohlenforst, Managing Director, Bauunternehmung Horst Ohlenforst
“Whenever we need to form up concrete members for outdoor facilities or construct side formwork for drop beams, DokaXlight is always the go-to solution and I really appreciate its light weight and ease of handling.”
Ralf Mang, foreman, Spiluttini Bau GmbH
“The DokaXlight handset formwork main panel measures 0.75 x 1.50m and weighs only 21.5 kg. That’s extremely light and very ergonomic; my people find working with this system very labour-saving. Less effort means that the work gets done faster and with more attention to detail.”
Questions about DokaXlight? Write to us.
Often searched:
Application Videos
