- safe up/down access is assured by ladders with slip-resistant rungs integrated into the frames
- individual safety aided by defined anchorage points for Personal protective equipment
- safe erection and dismantling ensured by "mounted-ahead" railings
- safe work stations provided by scaffold planking with and without manholes
- safe shoring of even very high loads, thanks to the load-bearing capacity of up to 100 kN per leg
- high stability, due to its 1.52 m wide frames
- excellent adaptability to different layouts, made possible by variable inter-frame spacing of between 0.60 m and 3.00 m
- continuous height adaptation with last-millimetre fine adjustment
- perfect adaptability, even to irregular layouts, by using a single leg
Viaduct on AVE Madrid-Valencia high-speed rail line
TRABAG and Doka bet on BIM-to-Field
Southern high-speed rail (ICE) link, Halle, Germany
Cooling tower for the Ptolemais Unit V lignite-fired power plant
Nieuw Havenhuis | New port building in Antwerp
System
Staxo 100 frames
- extremely robust steel frames available in 0.90 m, 1.20 m, and 1.80 m height for simple height adaptation
- built-in connectors make the system easy to set up
- safety catches for fast and safe diagonal cross assembly
- integral ladders with non-skid rungs
- defined attachment points for Personal protective equipment
- easily connected to frame tubing couplings
![1]()
![2]()
Diagonal crosses
- the firmly connected diagonal braces make the system quick and simple to erect
- different lengths of diagonal cross permit flexible inter-frame spacing, for cost-optimising the load capacity
- unmistakable length identification provided by colour-coded clips and embossed markings
Screw-jack heads and feet
- height adjustment possible right down to the last millimetre
- easy to operate, thanks to special thread geometry and integral fixing handle
- can be released with minimal physical effort, even when under load
![3]()
![4]()
Heavy-duty screw jack
The screw-jack extension length of up to 2 m per load-bearing tower permits optimum adaptation to changes in the level of the support base, to downstand beams and to sloping slabs.
Very high workplace safety
- 'mounted-ahead' railings for erecting and dismantling the towerframes safely when this is done with the tower in the upright
- toeboard for safe workplaces e.g. beneath the towerframe superstructure
- a mounting-gallows makes it easy to pull up the towerframes
![5]()
![6]()
Added single legs
- for easy adaptation to unusual layouts
- continuous positioning possible up to 1.50 m away from the tower
- optimised equipment utilisation
Scaffold planking units
- for safety while assembling and working inside the scaffold
- lightweight aluminium or timber decking (width: 60 cm) with manhole and sturdy steel decking (width: 30 cm)
- at least two decking units (60 cm) needed on each storey of load-bearing tower
- integrated anti-liftout guard allows scaffold planking units to be added even when the load-bearing towers are pre-assembled in the horizontal
![7]()
Utilisation
Simple and fast vertical stacking
- with few individual parts for simple use
- as connection sleeves and connecting pins are integrated in the frames
- thanks to logical set-up sequence
- because diagonal crosses are all clearly and unmistakably identified with colour-coded clips
![8]()
![9]()
Continuous height adjustment
- using the easy-to-operate screw-jack heads and feet for last-millimetre adjustment even when under load
- with a 2 m jack extension length per tower when the extra-strong Staxo 100 heavy duty screw jack is used
Stair tower
By combining standard Staxo 100 frames and pre-assembled aluminium stairway elements, this provides safe access to high-up workplaces.
![10]()
![11]()
Assembly using forklift truck or telescoping stacker truck
with this safe and effort-saving method, load-bearing towers are safely erected and dismantled in the upright as well as repositioned
Adaptation to unusual layouts
by combining the towers with single legs
![12]()
![13]()
Erecting towers in the upright
with 'mounted-ahead' railings and scaffold planking units with manholes, for high safety
Fast, safe repositioning
using winches, Shifting carriages TG or forklift trucks
![14]()
![15]()
Erecting towers in the horizontal
a safe, fast method of erecting the towers
Suitable products
